TRUCKING, RIGGING & ENGINEERING CAPABILITIES

Every Pedowitz Machinery Movers job starts with the best engineering services available in the trucking and rigging industry. Our experienced mechanical, civil and structural engineers are uniquely qualified to evaluate and tackle any job. We do this by bringing ample resources to bear on every logistical, rigging and heavy transport project. This often includes projects located in hard-to-reach places. What pushes the limits for our competition is normal for us. Here are three excellent examples.

The first is of our swapping out the Bloomberg data center assets in the lower west side of Manhattan, NYC in preparation for Google to take over building. A team over over 50 multi-certified millwrights as well as 25 tractor trailers, forklifts and other vehicles were utilized to get 10 alternate power generators and all the mechanical equipment off the roof and to our secure warehouse in New Jersey. 

The second involved a project for the General Services Administration where we had to transport, rig and assemble two alternate power generators in a secure building for the federal government. This project involved designing, engineering and installing a custom beam trolley system, as well as fabricating a structural platform to be integrated into the building’s steel beams in order to support a manual gantry system. 

To us, it’s normal. We’re registered with and approved by Homeland Security which was necessary for this job at JFK International Airport. At JFK the engine generates 45 megawatts of electricity through the generator and then produces heat for steam for a 25 mw steam turbine plus all the hot water heating for JFK airport. By us warehousing the spare engine and handling the logistics, we were able to shorten the turn-around time by four days. 

Our fleet of trucks include PETERBILT Models 389 (with 18 Speed Transmission, 13,200 Steer Axle, 40,000 Lb.), Model 567 (18 Speed Transmission, 13,200 Steer Axle, 46,000 Lb.), FREIGHTLINER Model Coronado 132 (18 Speed Transmission, 14,000 Steer Axle, 40,000 Lb.), Model 365 Conventional Cab/Chassis, Paccar MX-13 Engine (18 Speed Transmission, 12,000 Lb. Steer Axle, 44,000 Lb.), KENWORTH Model W900L (18 Speed Transmission, 14,000 Steer Axle, xle, 46,000 Lb.), PETERBILT Model 379 (18 Speed Transmission, 13,200 Steer Axle, 40,000 Lb.).

As far as vans we have:
GREAT DANE Model Aluminum Van, 53 Ft. Long, 102 Inches Wide, 13 Ft. 6 Inches High.

TRANSCRAFT Model DTL-2100 Steel Drop Deck, 48 Ft. Long, 102 Inches Wide, Wood Floor, 10 Ft. 2 Inch Spread Axle. Air Ride Suspension, Aluminum Disc Wheels, 255/70R22.5 Tires.

Other trucking equipment includes:

KAUFMAN Model FDWT-8K-22D Tilt Bed Trailer, 22 Ft. Long, Tandem Axle; LANDOLL Model 317 35 Ton Hydraulic Traveling Axle Trailer, 48 Ft. Long, 102 Inches Wide, Wood Floor, (15) Chain Tie-Downs Per Side, (1) Winch, Tandem Axle, Steel Disc Wheels, 10/R17.5 Tires, (Assumed Spec); LUFKIN Model Flatbed Conestoga, 48 Ft. Long, 102 Inches Wide, Air Ride Suspension, 22.5 Tires; TRANSCRAFT Model DTL-2100 Steel Drop Deck, 48 Ft. Long, 102 Inches Wide, Wood Floor, 10 Ft. 2 Inch Spread Axle. Air Ride Suspension, Aluminum Disc Wheels, 255/70R22.5 Tires; TALBERT Model T3-35CC-LD-HRG-T1 Lowboy, 48 Ft. Long, 102 Inches Wide, Non-Ground Bearing Gooseneck, Wood Floor, Air Ride Suspension, Steel Disc Wheels, 255/70R22.5 Tires, (Assumed Spec); MAC Model Aluminum Drop Deck, Curtain Side, 48 Ft. Long, 102 Inches Wide, Front Door, 10 Ft. 2 Inch Spread Axle. Air Ride Suspension, Aluminum Disc Wheels, 255/70R22.5 Tires; REITNOUER Model Big Bubba Aluminum Flatbed, 48 Ft. Long, 102 Inches Wide, Nail Strips, Air Ride Spread Axle, Aluminum Disc Wheels, 255/70R22.5 Tires; FONTAINE Model EDFT-7-9048-WSAWK Aluminum/Steel Drop Deck, 48 Ft. Long, 102 Inches Wide, Air Ride Suspension, Tri-Axle.

We also have a multitude of VERSA-LIFT Model 40/60 Forklift, 40,000/60,000 Lb. Capacity; YALE Model GLP060VX Forklift, 6,000 Lb. Capacity; HYSTER Model GLC155VX Forklift, 12,000 Lb. Capacity; KALMAR Model DC136-600XL Forklift, 30,000 Lb. Capacity; FORD Model Super Duty XL F-550 Crew Cab, Dual Rear Wheels, 4WD, 6.7 Liter Power Stroke Engine, Automatic Transmission, LT225/70SR19.5 Tires

Check out YouTube Channel and click subscribe so you’re in the loop as to our capabilities http://youtube.com/machinerymoversnyc

Call us today at (718) 923-1862 and talk to us about heavy equipment and machinery moving NYC